How To Use Speaker Stands To Improve The Sound Quality Of Your Stereo System
Despite the fact that speaker stands might not be the number one consideration when you want to improve the sound quality of your stereo, it is very possible that a speaker stand could go a long way in helping to better your home cinema setup. If you do plan to use speaker stands to improve the quality of your stereo’s sound, you will need to have the right stands, positioned in the proper places for maximum benefit.
To start off, decide what stands you'll need.
Loudspeaker stands will improve the bass in both bookshelf speakers and stand mount speakers. The loudspeaker stands will have to be the right height that they are elevating the speaker so that it will be close to level with the listener’s ear. The stand should be heavy so to provide the least vibration. If your speaker stand is not heavy enough you can always fill the bottom with sand, but only if you have sealed speakers. If you'd rather, you can use lead shots.
Positioning your speaker stands in the right location can also help to improve the sound of your stereo system. You will want to place your stereo stands about 200mm from the rear walls, plus they should be about 700mm from the walls on either side. Your speaker stands should also face slightly inward toward each other. When speakers are placed toward the rear wall it improves the bass sound. To prevent the bass from sounding boomy, don't place the speakers too close to the wall.
Another rule is to not place your loud speaker stands too close to TV stands, as the drive unit magnets may cause some interference with the TV’s picture and sound.
If your speakers are new out of the box, it’s important to know that speakers do not sound their best when they are new. You'll get the best sound after the speakers have been 'broken in' with 50 hours of use. For this reason you will not want to bother trying to adjust your sound with speaker stands until the speakers have been used for some time.
Once you have used your speakers for at least 50 hours you can then begin using speaker stands or audio racks and placement to help improve the sound of your speakers.
Do some sound tests as you position your speakers. Place them in various areas of the room and turn on your stereo to test the sound while you listen in your normal listening position. You should be able to get your speaker stands in a good position for best sound quality.
 |
No items matching your keywords were found.